Mecmesin Smart Force and Torque Sensors
for AFG and AFTI

Mecmesin "Smart" sensors, or transducers, are fully interchangeable without the need for additional calibration of either the display or the transducer. They plug directly into an AFTI (Advanced Force & Torque Indicator) or AFG (Advanced Force Gauge).

Force and torque readings are displayed in all appropriate SI, metric and imperial units of measurement, with an internal sampling rate of 5000Hz, ensuring highly accurate peak data capture.

Key Features

  • Calibration certificates traceable to UK National Standards
  • Resolution: 1:5000
  • Overload protection, by software warning: typically 120%
  • Overload protection, mechanical: up to 150%
  • Cable length: 1.5m

S-Beam Loadcell

The S-Beam provides an economical solution to general force measurement applications where space is not restricted. Dedicated fixures can be fitted via threaded holes.

  • 8 capacities from 100N to 25kN. Two additional (cylindrical) loadcells with capacities of 50kN and 100kN.
  • Peak hold of maximum load at fast rate 5000Hz when used with AFTI Display and Advanced Force Gauge
  • Accuracy ±0.5% of full scale
  • Compression only
Capacity Part # L mm W mm H mm Thread
22 lb /100 N / 10 kg 870-002-V03 51 13 64 M6 x 1
44 lb / 200 N / 20 kg 870-004-V03 51 13 64 M6 x 1
110 lb / 500 N / 50 kg 870-009-V03 51 13 64 M6 x 1
220 lb / 1000 N / 100 kg 870-001-V03 51 13 64 M10 x 1.5
550 lb / 2500 N / 250 kg 870-006-V03 51 25 76 M12 x 1.75
1100 lb / 5000 N / 500 kg 870-008-V03 51 25 76 M12 x 1.75
2200 lb / 10 kN / 1000 kg 870-003-V03 51 25 76 M12 x 1.75
5500 lb / 25 kN / 2500 kg 870-007-V03 51 25 76 M16 x 2

Junior S-Beam Loadcell

The junior S-Beam is suitable for tension and compression measurement. It is ideal for applications where available space is limited. Dedicated fixtures can be fitted via threaded holes.

  • 9 capacities from 1N to 500N
  • Peak hold of maximum load at fast rate 5000Hz when used with AFTI Display and Advanced Force Gauge
  • Accuracy ±0.5% of full scale
  • Compression only
Capacity Part # L mm W mm H mm Thread
3.5 oz / 1 N / 100 g 870-101 17 7 19 M3 x 05
9 oz / 2.5 N / 250 g 870-102 17 7 19 M3 x 05
18 oz / 5 N / 500 g 870-103 17 7 19 M3 x 05
2.2 lb 10 N / 1 kg 870-104 17 7 19 M3 x 05
5.5 lb / 25 N / 2.5 kg 870-105 17 7 19 M3 x 05
11 lb / 50 N / 5 kg 870-106 17 7 19 M3 x 05
22 lb / 100 N / 10 kg 870-107 17 7 19 M3 x 05
55 lb / 250 N / 25 kg 870-108 17 7 19 M3 x 05
110 lb / 500 N / 50 kg 870-109 17 7 19 M3 x 05

Miniature Button Loadcell

The Load Button Cell is a miniature sensor for compression measurement only. It is suitable for use where available space is very limited.

  • Models L16010, L16020 and L16030
  • 9 capacities from 100N to 50kN
  • Model L1630 (sub-miniature) 6 capacities from 50N to 5000N
  • Peak hold of maximum load at fast rate 5000Hz when used with AFTI Display and Advanced Force Gauge
  • Accuracy ±0.5% of full scale
  • Compression only
Model Part # Capacity ØD1 mm ØD2 mm H1 mm H2 mm
LT6010 878-008 22 lb / 100 N / 10 kg 25 5 8 1
878-009 5.5 lb / 250 N / 25 kg 25 5 8 1
878-010 110 lb / 500 N / 50 kg 25 5 8 1
LT6020 878-011 220 lb / 1000 N / 100 kg 31 8 10 1
878-012 550 lb / 2500 N / 250 kg 31 8 10 1
878-013 1100 lb / 5000 N / 500 kg 31 8 10 1
878-014 2200 lb / 10 kN / 1000 kg 31 8 10 1
LT6030 878-015 5500 lb / 20 kN / 2000 kg 38 11 16 2
878-016 1100 lb / 50 kN / 500 kg 38 11 16 2
Sub-Miniature
Series
LT6030		 878-001 11 lb / 50 N / 5 kg 19 3 6 1
878-002 22 lb / 100 N / 10 kg 19 3 6 1
878-003 55 lb / 250 N / 25 kg 19 3 6 1
878-004 110 lb / 500 N / 50 kg 19 3 6 1
878-005 220 lb / 1000 N / 100 kg 19 3 6 1
878-006 1100 lb / 5000 N / 500 kg 19 3 6 1

Static Torque Screwdriver

For low capacity applications. Used as a hand-held device or mounted in a bench stand (type TS only). Not suitable for applications which require multiple rotations of the sensor; such applications require rotary torque transducers.

  • TS Series, 4 capacities from 1.5N.m (13lbf.in) to 10N.m (90lbf.in)
  • Peak hold of maximum load at fast rate 5000Hz when used with AFTI Display and Advanced Force Gauge
  • Accuracy ±0.5% of full scale
  • Clockwise and anti-clockwise torque
Model Part # Capacity Drive L mm Ø mm
TS1.5 871-002 13 lb-in / 1.5 N-m / 15 kg-cm 3/8 in sq male / 3 jaw chuck 143 43
TS3 871-003 26 lb-in / 3 N-m / 30 kg-cm 3/8 in sq male / 3 jaw chuck 143 43
TS6 871-005 53 lb-in / 6 N-m / 60 kg-cm 3/8 in sq male / 3 jaw chuck 143 43
TS10 871-001 90 lb-in / 10 N-m / 100 kg-cm 3/8 in sq male / 3 jaw chuck 143 43

Miniature Torque Screwdriver

For low capacity applications. Used as a hand-held device or mounted in a bench stand (type TS only). Not suitable for applications which require multiple rotations of the sensor; such applications require rotary torque transducers.

  • H Series, 5 capacities from 10mN.m (1.4ozf.in) to 1N.m (10lbf.in)
  • Peak hold of maximum load at fast rate 5000Hz when used with AFTI Display and Advanced Force Gauge
  • Accuracy ±0.5% of full scale
  • Clockwise and anti-clockwise torque
  • Overload protection
  • Driver bits available on request
Model Part # Capacity Drive L mm Ø mm
H1 871-100 1.4 oz-in / 10 m-N / 100 g-cm 3h7* push-fit female 115 16
H5 871-101 8 oz-in / 50 m-N / 500 g-cm 3h7* push-fit female 115 16
H10 871-102 15 oz-in / 100 mN-m / 1000 g-cm 3h7* push-fit female 115 16
H50 871-103 5 lb-in / 500 mN-m / 5 kg-cm 1/4** hex female 124 22
H100 871-104 9 lb-in / 1 N-m / 10 kg-cm 1/4** hex female 124 22

Static Torque Wrench

For medium capacity applications where it is more practical to apply torque by a lever arm. Equipped with male square drive for easy fitting of adaptors.

  • TW Series: 3 capacities from 15N.m (130lbf.in) to 150N.m (1300lbf.in)
  • Peak hold of maximum load at fast rate 5000Hz when used with AFTI Display and Advanced Force Gauge
  • Accuracy ±0.5% of full scale
  • Clockwise and anti-clockwise torque
Model Part # Capacity Sq Drive Male L mm H mm Weight
TW15 873-003 130 lb-in / 15 N-m / 150 kg-cm 3/8 in 280 25 800 g
TW60 873-005 520 lb-in / 60 N-m / 600 kg-cm 3/8 in 355 25 950 g
TW150 873-006 1300 lb-in / 150 N-m / 1500 kg-cm 1/2 in 508 25 1200 g

Static Torque Transducer

For mounting to a bench or integrating into a complete test rig. Equipped with male square drive for easy fitting of adaptors.

  • ST Series, 4 capacities from 15N.m (130lbf.in) to 150N.m (1300lbf.in)
  • Peak hold of maximum load at fast rate 5000Hz when used with AFTI display and Advanced Force Gauge
  • Accuracy ±0.5% of full scale
  • Clockwise and anti-clockwise torque
Model Part # Capacity Sq Drive Male H mm W mm D mm
ST15 872-006 130 lb-in / 15 N-m / 150 kg-cm 3/8 in 32 80 90
ST60 872-008 520 lb-in / 60 N-m / 600 kg-cm 3/8 in 32 80 90
ST100 872-003 870 lb-in / 100 N-m / 1000 kg-cm 1/2 in 38 80 90
ST150 872-005 1300 lb-in / 150 N-m / 1500 kg-cm 1/2 in 38 80 90
ST600 872-007 600 N-m        
ST1000 872-002 1000 N-m        
STAND ACC008-975 Bench Mounting Stand        

Static Socket Extension

For low capacity torque testing applications, where space is limited. Fitted with male/female square drives for easy fitting of drivers.

  • SE Series, 3 capacities from 3N.m (26lbf.in) to 10N.m (90lbf.in)
  • Peak hold of maximum load at fast rate 5000Hz when used with AFTI Display and Advanced Force Gauge
  • Accuracy ±0.5% of full scale
  • Clockwise and anti-clockwise torque
Model Part # Capacity Sq Drive Male L mm
SE3 871-201 26 lb-in / 3 N-m / 30 kg-cm 1/4 in 50.8
SE6 871-202 50 lb-in / 6 N-m / 60 kg-cm 1/4 in 50.8
SE10 871-2003 90 lb-in / 10 N-m / 100 kg-cm 1/4 in 50.8

Rotary Torque Transducer

A complete range of sensors for measuring rotary torque. Suitable for applications with multiple revolutions (e.g. window-winder torque tools).

  • R Series, 3 capacities from 50mN.m (80lbf.in) to 50N.m (450lbf.in)
  • FAST Series, 10 capacities from 50mN.m (8ozf.in) to 150N.m (111lbf.ft)
  • Peak hold of maximum load at fast rate 5000Hz when used with AFTI Display and Advanced Force Gauge
  • Accuracy ±1% of full scale
  • Maximum 5000 r.p.m.
  • Clockwise and anti-clockwise torque
  • Overload protection
  • Rotary torque/angle sensors also available
Model Part #
RM 50 - 50mN.m Round shaft 877-010
RM 500 - 500m.Nm Round shaft 877-011
RN 1 - 1N.M Round shaft 877-012
FAST - 2N.m Square shaft 877-020
FAST - 2N.m Round shaft 877-021
FAST - 6N.m Square shaft 877-022
FAST - 6N.m Round shaft 877-023
FAST - 15N.m Square shaft 877-024
FAST - 15N.m Round shaft 877-025
FAST - 60N.m Square shaft 877-026
FAST - 60N.m Round shaft 877-027
FAST - 150N.m Square shaft 877-028
FAST - 150N.m Round shaft 877-029


More Mecmesin Products

More Ergonomics Products
Copyright © 1997-2007 NexGen Ergonomics Inc. All rights reserved. Legal and Privacy Information