Mark-10 Force/Torque Gauge Model BGI

The Mark-10 BGI Force / Torque Gauge is a unique product that is designed for working with interchangeable remote force and torque sensors. These sensors cover a variety of force measurement and torque measurement applications and are available in a broad range of capacities. No calibration or setup is required - simply plug and play.

Features and Specifications

• Fully interchangeable force and torque BGI force/torque sensors with "personality" modules
• Unlimited number of sensors possible due to unique design
• Programmable default configuration for each sensor
• RS-232, Mitutoyo and analog outputs
• GCL-Gauge Control Language for full computer control
• Averaging mode for average readings over time
• External trigger for data capture and switch testing
• Programmable dual set points with outputs
• General purpose I/O for external device control
• Programmable auto-shutoff
• Selectable units of measurement
• Push-button calibration
• Battery or AC operation
• Peak reading memory
• Accuracy: ± 0.1% of full scale ±1 digit + sensor's accuracy
• Sampling rate: 65 readings/sec
• Battery life: 8 hours per charge
• Weight: 0.9 lbs (0.4 kg)
• Environmental requirements: 40°F - 100°F [5°C - 45°C], <96% humidity (non-condensating)
• Warranty: 3 years
• CE mark

Optional Equipment

• Hi/Lo limits indicator
  Set limit conditions for a test - the indicator will display red lights for high and low limits, and a green light to indicate passing.
• Overload protection module
  Protects the force gauge against overloads during motorized tests, adjustable from 20 - 110% of gauge's full capacity. For use with Mark-10 motorized test stands.
• Set point cable
  Stops test stand travel at programmable high and low set points for tension and compression forces. For use with Mark-10 motorized test stands.
• Output cable
  Send test data to a PC, statistical printer, or other data collector for further analysis.
• Table top stand
  Includes mounting holes for bench mounting and angle adjustment. See image below.

Ordering Information

Optional Equipment

The Mark-10 BGI is supplied in a cushioned carrying case with AC adapter and rechargeable battery.

Dimensions